KS2612 BECKHOFF Bus Terminal, 2-channel relay output, 125 V AC, 30 V DC, 0.5 A AC, 2 A DC, pluggable wiring

Estimated Lead Time : 4-6 Weeks

Manufacturer : BECKHOFF

Part Number : KS2612

Number of outputs : 2 x change-over

Nominal voltage : 125 V AC/30 V DC

Load type : ohmic

Max. output current : 2 A per channel

Switching current : 0.5 A AC/2 A DC (ohmic)

Ohmic switching current : 0.5 A AC/2 A DC

Inductive switching current : no data

Minimum permitted load : 10 µA at 10 mV

Lamp test, electronic ballast : max. 2 A starting current

Electrical isolation : 500 V (K-bus/field potential)

Current consumption power contacts : –

Current consumption K-bus : typ. 60 mA

Bit width in the process image : 2 outputs

Operating cycles mech. (min.) : 1 x 108

Operating cycles electr. (min.) : 2 x 105 (1 A/30 V DC)

Configuration : no address or configuration setting

Special features : signal relay

Operating/storage temperature : 0…+55 °C/-25…+85 °C

Relative humidity : 95 %, no condensation

Vibration/shock resistance : conforms to EN 60068-2-6/EN 60068-2-27

EMC immunity/emission : conforms to EN 61000-6-2/EN 61000-6-4

Protect. rating/installation pos. : IP20/see documentation

Pluggable wiring : for all KSxxxx Bus Terminals

Approvals/markings : CE, UL, ATEX, DNV GL

Ex marking : II 3 G Ex nA IIC T4 Gc

Design form : terminal housing with pluggable wiring level

Material : polycarbonate

Installation : on 35 mm DIN rail, conforming to EN 60715 with lock

Side by side mounting by means of : double slot and key connection

Marking : labeling of the BZxxx series

Wiring : spring actuation by screwdriver

Connection cross-section : s*: 0.08…1.5 mm², st*: 0.08…1.5 mm², f*: 0.14…1.5 mm²

Connection cross-section AWG : s*:AWG 28…16, st*: AWG 28…16, f*: AWG 26…16

Stripping length : 9…10 mm

Current load power contacts : Imax: 10 A

Dimensions (L x W X H) : 6.8 cm x 1.2 cm x 10.0 cm

Weight : 0.08 kg

Shipping Weight : 2 Kg