Estimated Lead Time : 1 – 10 Working Days
Manufacturer : B&R
Material Number : X20AO4622
4 analog outputs
Either current or voltage signal possible
13-bit digital converter resolution
X20 analog output module, 4 outputs, 10 V or 0 to 20 mA / 4 to 20 mA, 13-bit converter resolution
I/O module : 4 analog outputs ±10 V or 0 to 20 mA / 4 to 20 mA
B&R ID code : 0x1BA3
Status indicators : I/O function per channel, operating state, module status
Module run/error : Yes, using LED status indicator and software
Channel type : Yes, using software
Power consumption
Bus : 0.01 W
Internal I/O : 1.8 W (Rev. ≥ J0), 2.2 W (Rev. < J0) Additional power dissipation caused by actuators (resistive) [W] : - Certifications CE : Yes UKCA : Yes ATEX : Zone 2, II 3G Ex nA nC IIA T5 Gc : IP20, Ta (see X20 user's manual) : FTZÚ 09 ATEX 0083X UL : cULus E115267 : Industrial control equipment HazLoc : cCSAus 244665 : Process control equipment : for hazardous locations : Class I, Division 2, Groups ABCD, T5 DNV : Temperature: B(0 - 55°C) : Humidity: B(up to 100%) : Vibration: B(4 g) : EMC: B(bridge and open deck) LR : ENV1 KR : Yes ABS : Yes EAC : Yes KC : Yes Output : ±10 V or 0 to 20 mA / 4 to 20 mA, via different terminals Max. output current : 10 mA at voltage >5 V : 15 mA at voltage <5 V Digital converter resolution Voltage : ±12-bit Current : 12-bit Conversion time : 300 µs for all outputs Settling time on output change over entire range : 500 µs Switch on/off behavior : Internal enable relay for startup Max. error Voltage Gain : 0.08% Offset : 0.05% Current Gain : 0.09% Offset : 0.05% Output protection : Short-circuit proof Output format Voltage : INT 0x8001 - 0x7FFF / 1 LSB = 0x0008 = 2.441 mV Current : INT 0x0000 - 0x7FFF / 1 LSB = 0x0008 = 4.883 µA Load per channel Voltage : Max. ±10 mA, load ≥1 k? Current : Load max. 600 Ω (Rev. ≥ J0), 500 Ω (Rev. < J0) Short-circuit proof : Current limiting ±40 mA Output filter : First-order low-pass filter / cutoff frequency 10 kHz Max. gain drift Voltage : 0.015%/°C Current : 0.02 %/°C Max. offset drift Voltage : 0.032%/°C Current : 0.032%/°C Error caused by load change Voltage : Max. 0.11%, from 10 MΩ → 1 kΩ, resistive Current : Max. 0.5%, from 1 Ω → 600 Ω, resistive Nonlinearity : <0.007% Insulation voltage between channel and bus : 500 Veff Electrical isolation : Channel isolated from bus : Channel not isolated from channel Mounting orientation Horizontal : Yes Vertical : Yes Installation elevation above sea level 0 to 2000 m : No limitation >2000 m : Reduction of ambient temperature by 0.5°C per 100 m
Degree of protection per EN 60529 : IP20
Temperature
Operation
Horizontal mounting orientation : -25 to 60°C (Rev. ≥ J0), 0 to 55°C (Rev. < J0) Vertical mounting orientation : -25 to 50°C (Rev. ≥ J0), 0 to 50°C (Rev. < J0) Derating : See section "Derating". Storage : -40 to 85°C Transport : -40 to 85°C Relative humidity Operation : 5 to 95%, non-condensing Storage : 5 to 95%, non-condensing Transport : 5 to 95%, non-condensing Note : Order 1x terminal block X20TB12 separately. : Order 1x bus module X20BM11 separately. Pitch : 12.5+0.2mm Shipping Weight : 2 Kg
Reviews
There are no reviews yet.