BMH1002P11A2A Schneider Electric servo motor BMH – 6.2 Nm – 6000 rpm – keyed shaft – without brake – IP54

Estimated Lead Time : 1 – 10 working days

Manufacturer : Schneider Electric

servo motor BMH – 6.2 Nm – 6000 rpm – keyed shaft – without brake – IP54

Product or component type : Servo motor

Device short name : BMH

Maximum mechanical speed : 6000 rpm

Continuous stall torque :

87 Lbf.in (6.2 N.m) for LXM32.D18N4 6 A at 400 V three phase

87 lbf.in (6.2 N.m) for LXM32.D18N4 6 A at 480 V three phase

Peak stall torque :

83 Lbf.in (18.4 N.m) for LXM32.D18N4 6 A at 400 V three phase

83 lbf.in (18.4 N.m) for LXM32.D18N4 6 A at 480 V three phase

Nominal output power :

1600 W for LXM32.D18N4 6 A at 400 V three phase

1600 W for LXM32.D18N4 6 A at 480 V three phase

Nominal torque :

51 lbf.in (3.9 N.m) for LXM32.D18N4 6 A at 400 V three phase

51 lbf.in (3.9 N.m) for LXM32.D18N4 6 A at 480 V three phase

Nominal speed :

4000 rpm for LXM32.D18N4 6 A at 400 V three phase

4000 rpm for LXM32.D18N4 6 A at 480 V three phase

Product compatibility : LXM32.D18N4 at 400…480 V three phase

Shaft end : Keyed

IP degree of protection : IP54 (standard)

Speed feedback resolution : 131072 points/turn

Holding brake : Without

Mounting support : International standard flange

Electrical connection : Rotatable right-angled connectors

Range compatibility : Lexium 32

[Us] rated supply voltage : 480 V

Phase : Three phase

Continuous stall current : 5.04 A

Continuous power : 2.36 W

Maximum current Irms : 18 A for LXM32.D18N4

Maximum permanent current : 18.23 A

Second shaft : Without second shaft end

Shaft diameter : 0.75 in (19 mm)

Shaft length : 1.57 in (40 mm)

Key width : 1.18 in (30 mm)

Feedback type : Single turn SinCos Hiperface

Motor flange size : 3.94 in (100 mm)

Number of motor stacks : 2

Torque constant : 1.2 N.m/A at 248 °F (120 °C)

Back emf constant : 77 V/krpm at 248 °F (120 °C)

Number of motor poles : 10

Rotor inertia : 6.28 kg.cm²

Stator resistance : 1.51 Ohm at 68 °F (20 °C)

Stator inductance : 7.5 mH at 68 °F (20 °C)

Stator electrical time constant : 5 ms at 68 °F (20 °C)

Maximum radial force Fr :

620 N at 4000 rpm

690 N at 3000 rpm

790 N at 2000 rpm

990 N at 1000 rpm

580 N at 5000 rpm

Maximum axial force Fa : 0.2 x Fr

Type of cooling : Natural convection

Length : 6.32 in (160.6 mm)

Centring collar diameter : 3.74 in (95 mm)

Centring collar depth : 0.14 in (3.5 mm)

Number of mounting holes : 4

Mounting holes diameter : 0.35 in (9 mm)

Circle diameter of the mounting holes : 4.53 in (115 mm)

Product weight : 4.92 kg

Shipping weight : 6 kg