RM35TM250MW Schneider Electric Harmony, Modular motor voltage and temperature control relay, 5 A , 2 NO, 24..240 V AC/DC

Estimated Lead Time : 4 – 6 weeks.

Manufacturer: Scheinder Electric

Part number: RM35TM250MW

Harmony, Modular motor voltage and temperature control relay, 5 A , 2 NO, 24..240 V AC/DC

Main

Range of product : Harmony Control Relays

Product or component type : 3-phase control relay

Relay type : Motor temperature control relay

Product specific application : For 3-phase supply

Relay name : RM35TM

Relay monitored parameters

Phase failure detection

Phase sequence

Test/reset button

Motor temperature via PTC probe

Selection (with or without memory)

time delay : Fixed 0.3 s

Switching capacity in VA : 1250 VA

Measurement range

208…480 V voltage AC

0…20 Ohm short-circuit detection

contacts type and composition : 2 NO

[Uc] control circuit voltage : 24…240 V

Complementary

Reset time : 10000 ms output

Maximum switching voltage

250 V AC

250 V DC

Minimum switching current : 10 mA at 5 V DC

Maximum switching current

5 A AC

5 A DC

Supply voltage limits

20.4…264 V AC

20.4…264 V DC

Power consumption in VA : 0…4 VA at 24…240 V AC

power consumption : 0.5 W DC

control circuit frequency : 50…60 Hz +/- 10 %

Resistance across terminals : 602 mOhm

Output contacts : 2 NO

Nominal output current : 5 A

Measurement voltage limits : 176…528 V AC

delay at power up : 500 ms

Voltage range : 176…528 V

Response time : > 50 ms (input Y1 (contact Y1-T1) and push-button)

[Uc] control circuit voltage : <= 3.6 V of temperature control circuit (T1-T2 terminals open) Short-circuit current : 0.007 A temperature sensing circuit (T1-T2 terminals short circuited) Maximum resistance : 1500 Ohm for temperature sensor at 20 °C Tripping threshold : 3100 Ohm +/- 10 % for temperature control circuit Reset threshold : 1650 Ohm +/- 10 % for temperature control circuit Marking : CE Overvoltage category : III conforming to IEC 60664-1 Insulation resistance > 500 MOhm at 500 V DC between supply and relay output conforming to IEC 60255-5

> 500 MOhm at 500 V DC between measurement and relay output conforming to IEC 60664-1

> 1 MOhm at 500 V DC between supply and measurement conforming to IEC 60255-5

> 500 MOhm at 500 V DC between supply and relay output conforming to IEC 60664-1

> 500 MOhm at 500 V DC between measurement and relay output conforming to IEC 60255-5

> 1 MOhm at 500 V DC between supply and measurement conforming to IEC 60664-1

[Ui] rated insulation voltage : 400 V conforming to IEC 60664-1

Supply frequency : 50/60 Hz +/- 10 %

Operating position : Any position without derating

Connections – terminals

Screw terminals, 1 x 0.5…1 x 4 mm² (AWG 20…AWG 11) solid without cable end

Screw terminals, 2 x 0.5…2 x 2.5 mm² (AWG 20…AWG 14) solid without cable end

Screw terminals, 1 x 0.2…1 x 2.5 mm² (AWG 24…AWG 12) flexible with cable end

Screw terminals, 2 x 0.2…2 x 1.5 mm² (AWG 24…AWG 16) flexible with cable end

Tightening torque : 0.6…1 N.m conforming to IEC 60947-1

Housing material : Self-extinguishing plastic

Local signalling

LED (green) for power ON

LED (yellow) for phase of relay (R2)

LED (yellow) for temperature of relay (R1)

Mounting support : 35 mm symmetrical DIN rail conforming to EN/IEC 60715

Electrical durability : 10000 cycles

Mechanical durability : 30000000 cycles

Operating rate : <= 360 operations/hour full load Utilisation category AC-12 conforming to IEC 60947-5-1 AC-13 conforming to IEC 60947-5-1 AC-14 conforming to IEC 60947-5-1 AC-15 conforming to IEC 60947-5-1 DC-12 conforming to IEC 60947-5-1 DC-13 conforming to IEC 60947-5-1 Width : 35 mm Net weight : 0.13 kg Shipping Weight : 1 Kg