Estimated Lead Time : 4 – 6 Weeks
Manufacturer : Schneider Electric
BMI1003P32F
Main :
Range compatibility : Lexium 32i
Product or component type : Servo motor with power stage
Device short name : BMI
Complementary :
Maximum mechanical speed : 6000 rpm
[Us] rated supply voltage : 208…480 V – 15…10 %
Supply voltage limits : 208…480 V
Network number of phase, s : Three phase,
Supply frequency : 50/60 Hz – 5…5 %
Network frequency limits : 47.5…63 Hz
EMC filter : Integrated
Continuous output current : 4 A at 8 kHz
Output current 3s peak : 12 A at 400 V for 3 s
Continuous stall current : 4 A
Continuous stall torque : 8.5 N.m at 208…480 V three phase,
Peak stall torque : 19.2 N.m at 400 V three phase, 19.2 N.m at 480 V three phase, 19.2 N.m at 208 V three phase,
Nominal output power : 1000 W at 208 V three phase, 2000 W at 400 V three phase, 2100 W at 480 V three phase,
Nominal torque : 7.2 N.m at 208 V three phase, 6.8 N.m at 400 V three phase, 5.6 N.m at 480 V three phase,
Nominal speed : 1500 rpm at 208 V three phase, 3000 rpm at 400 V three phase, 3700 rpm at 480 V three phase,
Maximum current Irms : 26.7 A at 208 V, three phase, 26.7 A at 400 V, three phase, 26.7 A at 480 V, three phase,
Product compatibility : Drive control unit LXM32i CANopen, Drive control unit LXM32i EtherCAT
Shaft end : Keyed
Second shaft : Without second shaft end
Shaft diameter : 19 mm
Shaft length : 40 mm
Key width : 6 mm
Feedback type : Absolute multiturn SinCos Hiperface
Speed feedback resolution : 131072 points/turn x 4096 turns
Holding brake : With
Holding torque : 9 N.m holding brake
Mounting support : International standard flange
Motor flange size : 100 mm
Electrical connection : Printed circuit board connector
Torque constant : 1.7 N.m/A at 20°C
Back emf constant : 112 V/krpm at 20°C
Number of motor poles : 10
Rotor inertia : 10.3 kg.cm²
Stator resistance : 2.31 Ohm at 20°C
Stator inductance : 11.43 mH at 20°C
Stator electrical time constant : 4.95 ms at 20°C
Maximum radial force Fr : 1050 N at 1000 rpm, 830 N at 2000 rpm, 730 N at 3000 rpm, 660 N at 4000 rpm, 610 N at 5000 rpm
Maximum axial force Fa : 0.2 x Fr
Brake pull-in power : 8 W
Type of cooling : Natural convection
Length : 338 mm
Number of motor stacks : 3
Centring collar diameter : 95 mm
Centring collar depth : 3.5 mm
Number of mounting holes : 4
Mounting holes diameter : 9 mm
Circle diameter of the mounting holes : 115 mm
Distance shaft shoulder-flange : 3.5 mm
Environment :
IP degree of protection : IP65
Weight : 11.0 Kg
Shipping Weight : 12.0 Kg
Reviews
There are no reviews yet.