Estimated Lead Time : 4 – 6 Weeks.
Manufacturer : Schneider Electric
Product No. : ATS48C41YS316
Product Type : Soft Starter for Asynchronous Motor
Range of product : Altistart 48
Product or component type : Soft starter
Product destination : Asynchronous motors
Product specific application : Heavy duty industry and pumps
Device short name : ATS48
Utilisation category : AC-53A
Ue power supply voltage : 208…690 V – 15…10 %
Power supply frequency : 50…60 Hz – 5…5 %
Motor power kW :
110 kW at 230 V for standard applications
160 kW at 400 V for severe applications
160 kW at 440 V for severe applications
220 kW at 400 V for standard applications
220 kW at 440 V for standard applications
220 kW at 500 V for severe applications
220 kW at 525 V for severe applications
250 kW at 500 V for standard applications
250 kW at 525 V for standard applications
250 kW at 660 V for severe applications
315 kW at 690 V for severe applications
355 kW at 660 V for standard applications
400 kW at 690 V for standard applications
90 kW at 230 V for severe applications
Motor power hp :
100 hp at 208 V for severe applications
125 hp at 208 V for standard applications
125 hp at 230 V for severe applications
150 hp at 230 V for standard applications
250 hp at 460 V for severe applications
300 hp at 460 V for standard applications
300 hp at 575 V for severe applications
350 hp at 575 V for standard applications
Device connection :
In the motor supply line
To the motor delta terminals
Protection type :
Phase failure: line
Thermal protection: motor
Thermal protection: starter
Standards : EN/IEC 60947-4-2
Product certifications :
DNV
GOST
C-Tick
TCF
CSA
UL
NOM 117
CCC
SEPRO
Marking : CE
Discrete input number : 5
Discrete input type :
PTC, 750 Ohm at 25 °C
(Stop, Run, LI3, LI4) logic, <= 8 mA 4300 Ohm Discrete input logic : Positive logic Stop, Run, LI3, LI4 at State 0: < 5 V and <= 2 mA at State 1: > 11 V, >= 5 mA
Minimum switching current : 10 mA at 6 V DC for relay outputs
Discrete output number : 2
Discrete output type :
(LO1) logic output 0 V common configurable
(LO2) logic output 0 V common configurable
(R1) relay outputs fault relay NO
(R2) relay outputs end of starting relay NO
(R3) relay outputs motor powered NO
Analogue output type : Current output AO: 0-20 mA or 4-20 mA, impedance <500 Ohm Communication port protocol : Modbus Connector type : 1 RJ45 Communication data link : Serial Physical interface : RS485 multidrop Transmission rate : 4800, 9600 or 19200 bps Function available : External bypass (optional) Operating position : Vertical +/- 10 degree Shipping Weight : 53 Kg
Reviews
There are no reviews yet.