BMH0701T11A2A Schneider Electric Servo motor BMH, Lexium 32, 1.4Nm, 8000rpm, keyed shaft, without brake, IP54, 128bit encoder

Estimated Lead Time : 1 – 10 working days.
Product or Component Type : Servo motor
Device short name : BMH
Maximum mechanical speed : 8000 rpm
Continuous stall torque :
1.4 N.m for LXM32.U90M2 at 3 A, 230 V, single phase
1.4 N.m for LXM32.D18M2 at 6 A, 115 V, single phase
Peak stall torque :
4 N.m for LXM32.U90M2 at 3 A, 230 V, single phase
4.2 N.m for LXM32.D18M2 at 6 A, 115 V, single phase
Nominal output power :
450 W for LXM32.U90M2 at 3 A, 230 V, single phase
350 W for LXM32.D18M2 at 6 A, 115 V, single phase
Nominal torque :
1.1 N.m for LXM32.U90M2 at 3 A, 230 V, single phase
1.35 N.m for LXM32.D18M2 at 6 A, 115 V, single phase
Nominal speed :
4000 rpm for LXM32.U90M2 at 3 A, 230 V, single phase
2500 rpm for LXM32.D18M2 at 6 A, 115 V, single phase
Product compatibility :
LXM32.D18M2 at 115 V single phase
LXM32.U90M2 at 230 V single phase
Shaft end : Keyed
IP degree of protection : IP54 standard
Speed feedback resolution : 131072 points/turn
Holding brake : Without
Mounting support : International standard flange
Electrical connection : Rotatable right-angled connectors
Range compatibility : Lexium 32
[Us] rated supply voltage : 240 V
Network number of phases : Three phase
Continuous stall current : 2.85 A
Continuous power : 1.05 W
Maximum current Irms :
9.6 A for LXM32.D18M2
9.6 A for LXM32.U90M2
Maximum permanent current : 9.56 A
Second shaft : Without second shaft end
Shaft diameter : 11 mm
Shaft length : 23 mm
Key width : 18 mm
Feedback type : Single turn SinCos Hiperface
Motor flange size : 70 mm
Number of motor stacks : 1
Torque constant : 0.49 N.m/A at 120 °C
Back emf constant : 31.17 V/krpm at 120 °C
Number of motor poles : 10
Rotor inertia : 0.59 kg.cm²
Stator resistance : 3.2 Ohm at 20 °C
Stator inductance : 9.1 mH at 20 °C
Stator electrical time constant : 2.8 ms at 20 °C
Maximum radial force Fr :
660 N at 1000 rpm
520 N at 2000 rpm
460 N at 3000 rpm
410 N at 4000 rpm
380 N at 5000 rpm
360 N at 6000 rpm
Maximum axial force Fa : 0.2 x Fr
Type of cooling : Natural convection
Length : 122 mm
Centring collar diameter : 60 mm
Centring collar depth : 2.5 mm
Number of mounting holes : 4
Mounting holes diameter : 5.5 mm
Circle diameter of the mounting holes : 82 mm
Product Weight : 1.6 kg
Shipping weight : 3 kg