BMH0702T11A2A Schneider Electric servo motor BMH, Lexium 32, 2.5Nm, 8000rpm, keyed shaft, without brake, IP54, 128bit encoder

Estimated Lead Time : 1 – 10 working days.
Manufacturer : Schneider Electric
Product or Component Type : Servo motor
Device short name : BMH
Maximum mechanical speed : 8000 rpm
Continuous stall torque :

22.13 lbf.in (2.5 N.m) LXM32.D30M2 10 A, 115 V, single phase
22.13 lbf.in (2.5 N.m) LXM32.D18M2 6 A, 230 V, single phase
Peak stall torque :

56.64 lbf.in (6.4 N.m) LXM32.D30M2 10 A, 115 V, single phase
65.50 lbf.in (7.4 N.m) LXM32.D18M2 6 A, 230 V, single phase
Nominal output power :

600 W LXM32.D30M2 10 A, 115 V, single phase
900 W LXM32.D18M2 6 A, 230 V, single phase
Nominal torque :

20.36 lbf.in (2.3 N.m) LXM32.D30M2 10 A, 115 V, single phase
18.59 lbf.in (2.1 N.m) LXM32.D18M2 6 A, 230 V, single phase
Nominal speed :

2500 rpm LXM32.D30M2 10 A, 115 V, single phase
4000 rpm LXM32.D18M2 6 A, 230 V, single phase
Product compatibility :

LXM32.D30M2 115 V single phase
LXM32.D18M2 230 V single phase
Shaft end : Keyed
IP Degree of Protection : IP54 standard
Speed feedback resolution : 131072 points/turn
Holding brake : Without
Mounting Support : International standard flange
Electrical Connection : Rotatable right-angled connectors
Range Compatibility : Lexium 32
[Us] rated supply voltage : 240 V
Phase : Three phase
Continuous stall current : 5.38 A
Continuous power : 1.51 W
Maximum current Irms :

15 A LXM32.D30M2
17.5 A LXM32.D18M2
Maximum permanent current : 17.71 A
Second shaft : Without second shaft end
Shaft diameter : 0.43 in (11 mm)
Shaft length : 0.91 in (23 mm)
Key width : 0.71 in (18 mm)
Feedback type : Single turn SinCos Hiperface
Motor flange size : 2.76 in (70 mm)
Number of motor stacks : 2
Torque constant : 0.46 N.m/A 248 °F (120 °C)
Back emf constant : 29.6 V/krpm 248 °F (120 °C)
Number of motor poles : 10
Rotor inertia : 1.13 kg.cm²
Stator resistance : 1.15 Ohm 68 °F (20 °C)
Stator inductance : 3.6 mH 68 °F (20 °C)
Stator electrical time constant : 3.1 ms 68 °F (20 °C)
Maximum radial force Fr :

710 N 1000 rpm
560 N 2000 rpm
490 N 3000 rpm
450 N 4000 rpm
410 N 5000 rpm
390 N 6000 rpm
Maximum axial force Fa : 0.2 x Fr
Type of cooling : Natural convection
Length : 6.06 in (154 mm)
Centring collar diameter : 2.36 in (60 mm)
Centring collar depth : 0.10 in (2.5 mm)
Number of mounting holes : 4
Mounting holes diameter : 0.22 in (5.5 mm)
Circle diameter of the mounting holes : 3.23 in (82 mm)
Product Weight : 5.07 lb(US) (2.3 kg)
Shipping weight : 4kg