Estimated Lead Time : 1 – 10 working days.
Manufacturer : Schneider Electric
Product or component type : Servo motor
Device short name : BMH
Maximum mechanical speed : 6000 rpm
Continuous stall torque :
3.3 N.m for LXM32.D12N4 at 3 A, 400 V, three phase
3.3 N.m for LXM32.D12N4 at 3 A, 480 V, three phase
3.4 N.m for LXM32.D18N4 at 6 A, 400 V, three phase
3.4 N.m for LXM32.D18N4 at 6 A, 480 V, three phase
Peak stall torque :
10.8 N.m for LXM32.D12N4 at 3 A, 400 V, three phase
10.8 N.m for LXM32.D12N4 at 3 A, 480 V, three phase
10.8 N.m for LXM32.D18N4 at 6 A, 400 V, three phase
10.8 N.m for LXM32.D18N4 at 6 A, 480 V, three phase
Nominal output power :
800 W for LXM32.D12N4 at 3 A, 400 V, three phase
800 W for LXM32.D12N4 at 3 A, 480 V, three phase
1300 W for LXM32.D18N4 at 6 A, 400 V, three phase
1300 W for LXM32.D18N4 at 6 A, 480 V, three phase
Nominal torque :
1.9 N.m for LXM32.D12N4 at 3 A, 400 V, three phase
1.9 N.m for LXM32.D12N4 at 3 A, 480 V, three phase
3.1 N.m for LXM32.D18N4 at 6 A, 400 V, three phase
3.1 N.m for LXM32.D18N4 at 6 A, 480 V, three phase
Nominal speed :
4000 rpm for LXM32.D12N4 at 3 A, 400 V, three phase
4000 rpm for LXM32.D12N4 at 3 A, 480 V, three phase
4000 rpm for LXM32.D18N4 at 6 A, 400 V, three phase
4000 rpm for LXM32.D18N4 at 6 A, 480 V, three phase
Product compatibility :
LXM32.D12N4 at 400…480 V three phase
LXM32.D18N4 at 400…480 V three phase
Shaft end : Keyed
IP degree of protection : IP54 standard
Speed feedback resolution : 131072 points/turn
Holding brake : With
Mounting support : International standard flange
Electrical connection : Rotatable right-angled connectors
Range compatibility : Lexium 32
[Us] rated supply voltage : 480 V
Network number of phases : Three phase
Continuous stall current : 3.15 A
Continuous power : 1.76 W
Maximum current Irms :
11.9 A for LXM32.D12N4
11.9 A for LXM32.D18N4
Maximum permanent current : 11.93 A
Second shaft : Without second shaft end
Shaft diameter : 19 mm
Shaft length : 40 mm
Key width : 30 mm
Feedback type : Single turn SinCos Hiperface
Holding torque : 5.5 N.m holding brake
Motor flange size : 100 mm
Number of motor stacks : 1
Torque constant : 1.1 N.m/A at 120 °C
Back emf constant : 70.3 V/krpm at 120 °C
Number of motor poles : 10
Rotor inertia : 3.68 kg.cm²
Stator resistance : 3.1 Ohm at 20 °C
Stator inductance : 13.9 mH at 20 °C
Stator electrical time constant : 4.5 ms at 20 °C
Maximum radial force Fr :
900 N at 1000 rpm
720 N at 2000 rpm
630 N at 3000 rpm
570 N at 4000 rpm
530 N at 5000 rpm
Maximum axial force Fa : 0.2 x Fr
Brake pull-in power : 12 W
Type of cooling : Natural convection
Length : 170.3 mm
Centring collar diameter : 95 mm
Centring collar depth : 3.5 mm
Number of mounting holes : 4
Mounting holes diameter : 9 mm
Circle diameter of the mounting holes : 115 mm
Product weight : 4.8 kg
Shipping weight : 6kg
Reviews
There are no reviews yet.