BMI1002P32A Schneider Electric 3-phase Servo Motor BMI 3-phase – keyed IP65 multiturn – 131072 p/t x 4096 t

Estimated Lead Time : 4 – 6 Weeks

Manufacturer : Schneider Electric

BMI1002P32A

Main:

Range compatibility: Lexium 32i

Product or component type: Servo motor with power stage

Device short name: BMI

Complementary:

Maximum mechanical speed: 6000 rpm

[Us] rated supply voltage: 208…480 V – 15…10 %

Supply voltage limits: 208…480 V

Network number of phases: Three phase

Supply frequency: 50/60 Hz – 5…5 %

Network frequency limits: 47.5…63 Hz

EMC filter: Integrated

Continuous output current: 4 A at 8 kHz

Output current 3s peak: 12 A at 400 V for 3 s

Continuous stall current: 4 A

Continuous stall torque: 6 N.m at 208…480 V three phase

Peak stall torque: 14 N.m at 208 V three phase, 14 N.m at 400 V three phase, 14 N.m at 480 V three phase

Nominal output power: 1000 W at 208 V three phase, 1900 W at 400 V three phase, 1900 W at 480 V three phase

Nominal torque: 5.1 N.m at 400 V three phase, 5.4 N.m at 208 V three phase, 4.1 N.m at 480 V three phase

Nominal speed: 1900 rpm at 208 V three phase, 3800 rpm at 400 V three phase, 4700 rpm at 480 V three phase

Maximum current Irms: 17.5 A at 208 V, three phase, 17.5 A at 400 V, three phase, 17.5 A at 480 V, three phase

Product compatibility: Drive control unit LXM32i CANopen, Drive control unit LXM32i EtherCAT

Shaft end: Keyed

Second shaft: Without second shaft end

Shaft diameter: 19 mm

Shaft length: 40 mm

Key width: 6 mm

Feedback type: Absolute multiturn SinCos Hiperface

Speed feedback resolution: 131072 points/turn x 4096 turns

Holding brake: Without

Mounting support: International standard flange

Motor flange size: 100 mm

Electrical connection: Printed circuit board connector

Torque constant: 1.28 N.m/A at 20°C

Back emf constant: 84.52 V/krpm at 20°C

Number of motor poles: 10

Rotor inertia: 6.28 kg.cm²

Stator resistance: 2.347 Ohm at 20°C

Stator inductance: 9.79 mH at 20°C

Stator electrical time constant: 4.17 ms at 20°C

Maximum radial force Fr: 990 N at 1000 rpm, 790 N at 2000 rpm, 690 N at 3000 rpm, 620 N at 4000 rpm, 580 N at 5000 rpm

Maximum axial force Fa: 0.2 x Fr

Type of cooling: Natural convection

Length: 273 mm

Number of motor stacks: 2

Centring collar diameter: 95 mm

Centring collar depth: 3.5 mm

Number of mounting holes: 4

Mounting holes diameter: 9 mm

Circle diameter of the mounting holes: 115 mm

Distance shaft shoulder-flange: 3.5 mm

Environment:

IP degree of protection: IP65

Weight : 9.5 Kg

Shipping Weight : 11.0 Kg