BMI1002T07F Schneider Electric 3-phase Servo Motor BMI 1-phase – untapped IP54 multiturn – 32768 p/t x 4096 t – brake

Estimated Lead Time : 4 – 6 Weeks

Manufacturer : Schneider Electric

BMI1002T07F

Main:

Range compatibility: Lexium 32i

Product or component type: Servo motor with power stage

Device short name: BMI

Complementary:

Maximum mechanical speed: 6000 rpm

[Us] rated supply voltage: 115…230 V – 15…10 %

Supply voltage limits: 100…240 V

Network number of phases: Single phase

Supply frequency: 50/60 Hz – 5…5 %

Network frequency limits: 47.5…63 Hz

EMC filter: Integrated

Continuous output current: 6 A at 8 kHz

Output current 3s peak: 18 A at 230 V for 3 s

Continuous stall current: 6 A

Continuous stall torque: 6 N.m at 115…230 V single phase

Peak stall torque: 14.5 N.m at 115 V single phase, 14.5 N.m at 230 V single phase

Nominal output power: 750 W at 115 V single phase, 1300 W at 230 V single phase

Nominal torque: 5.4 N.m at 115 V single phase, 4.4 N.m at 230 V single phase

Nominal speed: 1400 rpm at 115 V single phase, 3000 rpm at 230 V single phase

Maximum current Irms: 30 A at 115 V, single phase, 30 A at 230 V, single phase

Product compatibility: Drive control unit LXM32i CANopen, Drive control unit LXM32i EtherCAT

Shaft end: Untapped

Second shaft: Without second shaft end

Shaft diameter: 19 mm

Shaft length: 40 mm

Feedback type: Absolute multiturn SinCos Hiperface

Speed feedback resolution: 32768 points/turn x 4096 turns

Holding brake: With

Holding torque: 5.5 N.m holding brake

Mounting support: International standard flange

Motor flange size: 100 mm

Electrical connection: Printed circuit board connector

Torque constant: 0.89 N.m/A at 20°C

Back emf constant: 58.5 V/krpm at 20°C

Number of motor poles: 10

Rotor inertia: 6.77 kg.cm²

Stator resistance: 1.08 Ohm at 20°C

Stator inductance: 4.7 mH at 20°C

Stator electrical time constant: 4.35 ms at 20°C

Maximum radial force Fr: 990 N at 1000 rpm, 790 N at 2000 rpm, 690 N at 3000 rpm, 620 N at 4000 rpm, 580 N at 5000 rpm

Maximum axial force Fa: 0.2 x Fr

Brake pull-in power: 8 W

Type of cooling: Natural convection

Length: 282 mm

Number of motor stacks: 2

Centring collar diameter: 95 mm

Centring collar depth: 3.5 mm

Number of mounting holes: 4

Mounting holes diameter: 9 mm

Circle diameter of the mounting holes: 115 mm

Distance shaft shoulder-flange: 3.5 mm

Environment:

IP degree of protection: Shaft: IP54, Housing: IP65

Weight : 9.5 Kg

Shipping Weight : 11.0 Kg