RM35ATW5MW Schneider Electric Harmony, Modular temperature 3-phase control relay, 5 A , 2 NO, 24..240 V AC/DC

Estimated Lead Time : 4 – 6 weeks.

Manufacturer: Scheinder Electric

Part number: RM35ATW5MW

Harmony, Modular temperature control relay, 5 A , 2 NO, 24..240 V AC/DC

Main

Range of product : Harmony Control Relays

Product or component type : Temperature control relay

Relay type : Temperature control relays

Product specific application : For elevator machine rooms and 3-phase supplies

Relay name : RM35AT

Relay monitored parameters

Phase sequence

Phase failure detection

Undertemperature: -1…11°C

Overtemperature: 34…46°C

Time delay range : 0.1…10 s adjustable delay (tolerance: 0…10 % of the full scale value)

Switching capacity in VA : 1250 VA

Minimum switching current : 10 mA at 5 V DC

Maximum power consumption in VA : 3.5 VA AC

Utilisation category

AC-12 conforming to IEC 60947-5-1

AC-13 conforming to IEC 60947-5-1

AC-14 conforming to IEC 60947-5-1

AC-15 conforming to IEC 60947-5-1

DC-12 conforming to IEC 60947-5-1

DC-13 conforming to IEC 60947-5-1

DC-14 conforming to IEC 60947-5-1

Complementary

Reset time : 8 s

Maximum switching voltage : 250 V AC/DC

[Us] rated supply voltage : 24…240 V AC/DC

[Us] rated supply voltage : 24…240 V AC/DC

Supply voltage limits

20.4…264 V AC

21.6…264 V DC

Maximum power consumption in W : 0.6 W DC

Resistance across terminals : 1.33 kOhm at temperature

Width : 35 mm

Output contacts : 2 NO

contacts material : Cadmium free

Nominal output current : 5 A

delay at power up : 0.2 s

Measurement accuracy : +/- 2 °C

Response time

<= 3.5 s + Tt (in case of temperature fault) 500 ms (in case of 3-phase fault) 500 ms (on disappearance of fault) temperature probe type : Pt 100 - 3-wire Installed device : Pt 100 probe cable length <= 10 m Marking CE : EMC 89/336/EEC CE : 73/23/EEC Overvoltage category : III conforming to IEC 60664-1 Insulation resistance > 500 MOhm at 500 V DC between supply and relay output conforming to IEC 60255-5

> 500 MOhm at 500 V DC between measurement and relay output conforming to IEC 60664-1

> 1 MOhm at 500 V DC between supply and measurement conforming to IEC 60255-5

> 500 MOhm at 500 V DC between supply and relay output conforming to IEC 60664-1

> 500 MOhm at 500 V DC between measurement and relay output conforming to IEC 60255-5

> 1 MOhm at 500 V DC between supply and measurement conforming to IEC 60664-1

[Ui] rated insulation voltage : 400 V conforming to IEC 60664-1

operating voltage tolerance

– 10 % + 10 % Un DC

– 15 % + 10 % Un AC

Supply frequency : 50/60 Hz +/- 10 %

insulation : Galvanic insulation between supply and measurement

Operating position : Any position without derating

Connections – terminals

Screw terminals, 1 x 0.5…1 x 4 mm² (AWG 20…AWG 11) solid without cable end

Screw terminals, 2 x 0.5…2 x 2.5 mm² (AWG 20…AWG 14) solid without cable end

Screw terminals, 1 x 0.2…1 x 2.5 mm² (AWG 24…AWG 12) flexible with cable end

Screw terminals, 2 x 0.2…2 x 1.5 mm² (AWG 24…AWG 16) flexible with cable end

Tightening torque : 0.6…1 N.m conforming to IEC 60947-1

Housing material : Self-extinguishing plastic

local signalling

1 LED green for power ON

1 LED yellow for correct temperature (high R1)

1 LED yellow for correct temperature (low R2)

Mounting support : 35 mm symmetrical DIN rail conforming to EN/IEC 60715

Electrical durability : 100000 cycles

Mechanical durability : 30000000 cycles

Operating rate : <= 360 operations/hour full load Weight : 0.133 Kg Shipping Weight : 1 Kg