Estimated Lead Time : 4-6 Weeks
Manufacturer : Sick Sensors
Incremental encoders DFS60
Performance
Pulses per revolution : 5000 1)
Measuring step : 90° electric/pulses per revolution
Measuring step : deviation at binary number of lines ± 0.001°
Error limits : ± 0.05°
1) See maximum revolution range.
Interfaces
Communication interface : Incremental
Communication Interface detail : TTL / RS-422
Number of signal channels : 6-channel
0-set function via hardware pin : Yes
0-SET function : H-active, L = 0 – 3 V, H = 4,0 – Us V 1)
Initialization time : 30 ms
Output frequency : ≤ 600 kHz
Load current : ≤ 30 mA
Operating current : 40 mA (without load)
Power consumption : Without load
Electrical data
Connection type : Male connector, M23, 12-pin, radial
Supply voltage : 4.5 … 5.5 V
Reference signal, number : 1
Reference signal, position : 90°, electric, logically gated with A and B
Reverse polarity protection : Yes
Short-circuit protection of the outputs : Yes 1)
MTTFd: mean time to dangerous failure : 300 years (EN ISO 13849-1) 2)
1) Programming TTL with ≥ 5.5 V: short-circuit opposite to another channel or GND permissable for maximum 30 s.
2) This product is a standard product and does not constitute a safety component as defined in the Machinery Directive. Calculation based on nominal load of components, average ambient temperature 40°C, frequency of use 8760 h/a. All electronic failures are considered hazardous. For more information, see document no. 8015532.
Mechanical data
Mechanical design : Blind hollow shaft
Shaft diameter : 12 mm
Weight : + 0.2 kg
Shaft material : Stainless steel
Flange material : Aluminum
Housing material : Aluminum die cast
Start up torque : 0.8 Ncm (+20 °C)
Operating torque : 0.6 Ncm (+20 °C)
Permissible movement static
± 0.3 mm (radial)
± 0.5 mm (axial)
Permissible movement dynamic
± 0.02 mm (radial)
± 0.01 mm (axial)
Operating speed : ≤ 6,000 min?¹ 1)
Moment of inertia of the rotor : 40 gcm²
Bearing lifetime : 3.6 x 10^10 revolutions
Angular acceleration : ≤ 500,000 rad/s²
1) Allow for self-heating of 3.3 K per 1,000 rpm when designing the operating temperature range.
Shipping Weight : 1 Kg
Reviews
There are no reviews yet.