103004371 Schmersal RSS16-SD-CC Electronic safety sensors

Estimated Lead Time : 3-5 Weeks

Manufacturer : Schmersal

RSS16-SD-CC

Ordering data

Article number (order number) : 103004371

EAN (European Article Number) : 4030661456973

eCl@ss number, version 11.0 : 27-27-24-03

eCl@ss number, version 9.0 : 27-27-24-03

ETIM number, version 7.0 : EC000030

ETIM number, version 6.0 : EC000030

Approvals – Standards

Certificates : TÜV, cULus, FCC, IC, UKCA

General data

Standards : EN IEC 60947-5-3

Coding : Universal coding

Coding level according to EN ISO 14119 : Low

Working principle : RFID

Housing construction form : Block

Installation conditions (mechanical) : not flush

Sensor topology : Sensor for series wiring

Enclosure material : Plastic, glass-fibre reinforced thermoplastic, self-extinguishing

Active area : Glass-fibre, reinforced thermoplastic

Reaction time, maximum : 100 ms

Duration of risk, maximum : 200 ms

General data – Features

Serial diagnostics : Yes

Short circuit detection : Yes

Cross-circuit detection : Yes

Series-wiring : Yes

Safety functions : Yes

Cascadable : Yes

Integral system diagnostics, status : Yes

Number of LEDs : 2

Number of semi-conductor outputs with signaling function : 1

Number of fail-safe digital outputs : 2

Number of series-wiring of sensors : 31

Safety classification

Standards : EN ISO 13849-1, EN IEC 61508

Performance Level, up to : e

Category : 4

PFH value : 6.30 x 10?¹¹ /h

PFD value : 1.50 x 10?5

Safety Integrity Level (SIL), suitable for applications in : 3

Mission time : 20 Year(s)

Mechanical data

Actuating panels : front side, rear, from head

Active area : lateral, front side, cover-side

Mounting : 2 x M5, Cylinder head screw

Tightening torque of the fixing screws : 2 Nm

Mechanical data – Switching distances according EN IEC 60947-5-3

Switch distance, typical : 15 mm

Assured switching distance “ON” Sao : 12 mm

Assured switching distance “OFF” Sar : 30 mm

Hysteresis (Switching distance), maximum : 2 mm

Repeat accuracy R : 0.5 mm

Mechanical data – Connection technique

Note (length of the sensor chain) : Cable length and cross-section change the voltage drop dependiing on the output current

Note (series-wiring) : Unlimited number of devices, oberserve external line fusing, max. 31 devices in case of serial diagnostic SD

Cable entry : 4 x M16 x 1,5

Termination : Spring pulley connection

Mechanical data – Dimensions

Length of sensor : 91 mm

Width of sensor : 52 mm

Height of sensor : 30 mm

Ambient conditions

Degree of protection : IP65, IP67

Ambient temperature : -25 … +70 °C

Storage and transport temperature, minimum : -25 °C

Storage and transport temperature, maximum : +85 °C

Relative humidity, maximum : 93 %

Note (Relative humidity) : non-condensing, non-icing

Restistance to shock : 30 g / 11 ms

Permissible installation altitude above sea level, maximum : 2,000 m

Ambient conditions – Insulation values

Rated insulation voltage Ui : 32 VDC

Rated impulse withstand voltage Uimp : 0.8 kV

Overvoltage category : III

Degree of pollution : 3

Electrical data

Operating voltage : 24 VDC -15 % / +10 %

Operating current, minimum : 0.5 mA

No-load supply current I0, typical : 100 mA

Rated operating voltage : 24 VDC

Operating current : 2,100 mA

Required rated short-circuit current : 100 A

Time to readiness, maximum : 2,000 ms

Switching frequency, maximum : 1 Hz

Electrical data – Safety digital inputs

Current consumption of the safety inputs : 5 mA

Electrical data – Safety digital outputs

Rated operating current (safety outputs) : 1,000 mA

Output current, (fail-safe output), maximum : 1 A

Design of control elements : p-type

Voltage drop Ud, maximum : 1 V

Leakage current Ir, maximum : 0.5 mA

Voltage, Utilisation category DC-12 : 24 VDC

Current, Utilisation category DC-12 : 1 A

Voltage, Utilisation category DC-13 : 24 VDC

Current, Utilisation category DC-13 : 1 A

Electrical data – Diagnostic outputs

Operating current : 50 mA

Design of control elements : p-type

Voltage drop Ud, maximum : 2 V

Voltage, Utilisation category DC-12 : 24 VDC

Current, Utilisation category DC-12 : 0.05 A

Voltage, Utilisation category DC-13 : 24 VDC

Current, Utilisation category DC-13 : 0.05 A

Electrical data – Serial diagnostic SD

Designation, Serial diagnostic SD : OUT

Operation current : 150 mA

Design of control elements : short-circuit proof, p-type

Wiring capacitance : 50 nF

Electrical data – Electromagnetic compatibility (EMC)

Interfering radiation : IEC 61000-6-4

EMC rating : IEC 60947-3

Status indication

Note (LED switching conditions display) :

Multi-coloured LED: Green, Red

LED yellow: Operating condition

LED green: Supply voltage

LED red: Fault

Scope of delivery : Actuator must be ordered separately.

Accessory

Recommendation (actuator) : RST16-1

Recommended safety switchgear : PROTECT PSC1

Weight : 0.25 Kg

Shipping Weight : 1.0 Kg