ATS22C17QSchneiderElectricSoft starter-ATS22-control 220V-power 230V(45kW)/400…440V(90kW)

Estimated Lead Time : 4 – 6 weeks

Manufacturer : Scheinder Electric

Part number : ATS22C17Q

Range of product : Altistart 22

Product or component type : Soft starter

Product destination :Asynchronous motors

Product specific application : Pumps and fans

Component name : ATS22

Network number of phases : 3 phases

[Us] Rated supply voltage :230…440 V – 15…10 %

Motor power Kw : 45 kW 230 V, 90 kW 400 V, 90 kW 440 V

Factory setting current : 162 A

Power dissipation in W : 91 W for standard applications

Utilisation category :AC-53A

Type of start : Start with torque control (current limited to 3.5 In)

IcL starter rating :170 A for connection in the motor supply line for standard applications

IP degree of protection : IP00

Assembly style :With heat sink

Function available : Internal bypass

Supply voltage limits : 195…484 V

Supply frequency : 50…60 Hz – 10…10 %

Network frequency : 45…66 Hz

Device connection :To the motor delta terminals, In the motor supply line

[Uc] Control circuit voltage : 230 V – 15…10 % 50/60 Hz

Control circuit consumption : 20 W

Discrete output number :2

Discrete output type : Relay outputs R1 230 V running, alarm, trip, stopped, not stopped, starting, ready C/O

Relay outputs R2 230 V running, alarm, trip, stopped, not stopped, starting, ready C/O

Minimum switching current : 100 mA at 12 V DC (relay outputs)

Discrete input number : 3

Discrete input type : (LI1, LI2, LI3) logic, 5 mA 4.3 kOhm

Discrete input voltage : 24 V <= 30 V Discrete input logic :Positive logic LI1, LI2, LI3 at State 0: < 5 V and <= 2 mA at State 1: > 11 V, >= 5 mA

Output current :0.4…1 Icl adjustable

PTC probe input :750 Ohm

Communication port protocol :Modbus

Connector type :1 RJ45

Communication data link :Serial

Physical interface : RS485 multidrop

Transmission rate : 4800, 9600 or 19200 bps

Installed device :31

Protection type : Phase failure: line, Thermal protection: motor, Thermal protection: starter

Marking : CE

Type of cooling : Forced convection

Operating position : Vertical +/- 10 degree

Height :356 mm

Width : 150 mm

Depth : 229.5 mm

Net weight : 18 kg

Motor power range AC-3 : 30…50 kW at 200…240 V 3 phases, 55…100 kW at 380…440 V 3 phases

Motor starter type : Soft starter

Standards :EN/IEC 60947-4-2

Vibration resistance :1 gn (f= 13…200 Hz) conforming to EN/IEC 60068-2-6, 1.5 mm (f= 2…13 Hz) conforming to EN/IEC 60068-2-6

Shock resistance : 15 gn for 11 ms conforming to EN/IEC 60068-2-27

Noise level :56 dB

Pollution degree :Level 2 conforming to IEC 60664-1

Relative humidity0…95 % without condensation or dripping water conforming to EN/IEC 60068-2-3

Ambient air temperature for operation : -10…40 °C (without derating), 40…60 °C (with current derating 2.2 % per °C)

Ambient air temperature for storage :-25…70 °C

Operating altitude : <= 1000 m without derating, > 1000…< 2000 m with current derating of 2.2 % per additional 100 m Unit Type of Package 1 : PCE Number of Units in Package 1 : 1 Package 1 weight : 13.218 kg Package 1 Height : 25 cm Package 1 width : 33 cm Package 1 Length 41 cm Unit Type of Package 2 : P06 Number of Units in Package 2 :4 Package 2 weight : 64.064 kg Package 2 Height : 73.5 cm Package 2 width :80 cm Package 2 Length : 60 cm Sustainable offer status : Green Premium product EU RoHS Directive : Pro-active compliance (Product out of EU RoHS legal scope), EU RoHS Declaration Mercury free : Yes RoHS exemption information : Yes China RoHS Regulation : China RoHS declaration Environmental Disclosure : Product Environmental Profile Circularity Profile : End of Life Information WEEE : The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins Warranty : 18 months Shipping weight : 19 KG