Estimated Lead Time : 1 – 10 Working days.
Manufacturer : Honeywell
Product No. : SPXCDXSG1SS
Product Type : Sensepoint XCD Transmitter (without Sensor)
Use: 3 wire, 4-20mA and RS485 MODBUS output fixed point detector with in-built alarm and fault relays for the protection of personnel and plant from flammable, toxic and Oxygen hazards. Incorporating a transmitter with local display and fully configurable via non-intrusive magnetic switch interface.
Input Voltage Range: 16 to 32VDC (24VDC nominal)
Max Power Consumption: Maximum power consumption is dependent on the type of gas sensor being used. Electrochemical cells = 3.7W, IR = 3.7W and catalytic = 4.9W. Maximum inrush current = 800mA at 24VDC
Current Output: Sink or source
Relays: 3 x 5A@250VAC. Selectable normally open or normally closed (switch) and energized/de-energised (programmable) Alarm relays default normally open/de-energized. Fault relay default normally open/energized
Communication: RS485, MODBUS RTU Construction
Material: Housing: Epoxy painted aluminium alloy LM25 or 316 stainless steel
Sensor: 316 stainless steel
Weight (approx): Aluminium Alloy LM25: 4.4lbs | 316 Stainless Steel: 11lbs
Mounting: Integral mounting plate with 4 x mounting holes suitable for M8 bolts. Optional pipe mounting kit for horizontal or vertical pipe Ø1.5 to 3″ (2″ nominal)
Cable Entries: ULcUL versions: 2 x ¾”NPT conduit entries. Suitable blanking plug supplied for use if only 1 entry used. Seal to maintain IP rating; ATEX/IECEx versions: 2 x M20 cable entries
IP Rating: IP66 in accordance with EN60529:1992
Certified Temperature Range: 40ºF to +149ºF (-40ºC to +65ºC)
Shipping Weight : 10 Kg
Reviews
There are no reviews yet.