Estimated Lead Time : Usually ships in 1 – 10 working days.
Manufacturer : Honeywell
Product No : STD810-E1AC4AS-1-C-AHB-11S-A-10A0-0000
Product type : STD800 Differential Pressure Transmitter
Measurement Range : STD810 = 10 (25.0) URL, -10 (-25.0) LRL, 10 (25) Max Span, 0.1 (0.25) Min Span, ” H2O (mbar) units
Process Wetted Heads & Diaphragm Materials : E = 316 Stainless Steel Process Head Material, 316L Stainless Steel Diaphragm Material
Fill Fluid : 1 = Silicone Oil 200
Process Connection : A = None, None (1/4″ NPTF female thread Std)
Bolt/Nut Materials : C = Carbon Steel
Vent/Drain Type/Location : 4 = Dual Ended Head Type, Standard Vent type, End Location, Matches Head Material
. Gasket Material : A = Teflon® or PTFE (Glass Filled)
Static Pressure : S = Standard Static Pressure – 4500 psig (310 bar) except STD810: 50 psi (3.5 bar)
Head/Connect Orientation : 1 = Standard, High Side Left, Low Side Right2 / Std Head Orientation
Approvals : C = ATEX Explosion proof, Intrinsically Safe & Non-incendive
Electronic Housing Material & Connection Type : A = Polyester Powder Coated Aluminum,1/2 NPT, None Lightning Protection
Output/ Protocol : H = 4-20mA dc Analog Output, HART Protocol
Customer Interface Selections : B = Basic Indicator, None Ext Zero, Span & Config Buttons, English
Application Software : 1 = Standard Diagnostics
Output Limit, Failsafe & Write Protect Settings : 1 = Disabled Write Protect, High> 21.0mAdc Fail Mode, Honeywell Std (3.8 – 20.8 mAdc) High & Low Output Limits
General Configuration : S = Factory Standard
Accuracy and Calibration : A = Standard Accuracy, Factory Std Calibrated Range, Single Calibration Qty
Mounting Bracket : 1 = Angle Bracket, Carbon Steel
Customer Tag : 0 = No customer tag
Unassembled Conduit Plugs & Adapters : A0 = No Conduit Plugs or Adapters Required
Weight : 3.8 Kg
Shipping Weight: 8 Kg
Reviews
There are no reviews yet.