TM5SDM12DT Schneider Electric Discrete IO module, Modicon TM5, 8 DI, 4O, 24V DC, 1 wire

Estimated Lead Time : 4 – 6 weeks.

Manufacturer : Schneider Electric

Discrete IO module, Modicon TM5, 8 DI, 4O, 24V DC, 1 wire

Range of product :Modicon TM5

Product or component type :Discrete I/O module

Discrete input number :8

Discrete input voltage :24 V

Discrete output number :4

Discrete output type :Transistor

Complementary

Range compatibility :Modicon M258 | Modicon LMC058 | PacDrive LMC motion controller

Product compatibility :PacDrive LMC Pro 2 | Motion controller | PacDrive LMC Pro | PacDrive LMC Eco | Logic controller

Discrete input voltage type :DC

Input voltage limits :20.4…28.8 V

Discrete input logic :Sink

Discrete input current :3.75 mA

Input impedance :6.4 kOhm

Output voltage :24 V DC

Output voltage limits :20.4…28.8 V

Discrete output logic :Source

Current per channel :0.5 A

maximum current per output common :2 A

Colour :White

Peak output current :12 A

Switching frequency : <= 500 Hz resistive load Voltage state 0 guaranteed :<= 5 V Voltage state 1 guaranteed :>= 15 V

Input filtering :<= 25 ms configurable by software | <= 100 ms hardware Response time :<= 300 µs from state 0 to state 1 for output | <= 300 µs from state 1 to state 0 for output Maximum leakage current :5 µA when switched off Protection type :Reverse polarity protection | Short-circuit protection | Overload protection Isolation :No insulation between channels | 500 Vrms AC insulation between channel and bus Maximum voltage drop :<0.3 V at 500 mA for output Current consumption :42 mA at 5 V DC bus | 21 mA at 24 V DC all inputs On Maximum power dissipation in W :1.52 W Local signalling :1 LED green for power supply | 1 LED red for power supply | 4 LEDs yellow for output status | 8 LEDs green for input status Electrical connection :1 wire Marking :CE Product weight :0.025 kg Environment Standards :CSA C22.2 No 142 | UL 508 | CSA C22.2 No 213 | IEC 61131-2 Product certifications :GOST-R | cULus | C-Tick | CSA Ambient air temperature for operation :-10…55 °C without derating (horizontal installation) |-10…60 °C with derating factor (horizontal installation) | -10…50 °C (vertical installation) Ambient air temperature for storage :-40…70 °C Relative humidity :5…95 % without condensation IP degree of protection :IP20 conforming to IEC 61131-2 Pollution degree :2 conforming to IEC 60664 Operating altitude :0...2000 m Storage altitude :0…3000 m Vibration resistance :1 gn at 8.4…150 Hz on DIN rail | 3.5 mm at 5…8.4 Hz on DIN rail Shock resistance :15 gn for 11 ms Electromagnetic compatibility :Electrostatic discharge immunity test, 4 kV on contact conforming to EN/IEC 61000-4-2 | Electrostatic discharge immunity test, 8 kV in air conforming to EN/IEC 61000-4-2 | Susceptibility to electromagnetic fields, 1 V/m 2...2.7 GHz conforming to EN/IEC 61000-4-3 | Susceptibility to electromagnetic fields, 10 V/m 80...2000 MHz conforming to EN/IEC 61000-4-3 | Electrical fast transient/burst immunity test, 1 kV I/O conforming to EN/IEC 61000-4-4 | Electrical fast transient/burst immunity test, 1 kV shielded cable conforming to EN/IEC 61000-4-4 | Electrical fast transient/burst immunity test, 2 kV power lines conforming to EN/IEC 61000-4-4 | 1.2/50 µs shock waves immunity test, 0.5 kV differential mode conforming to EN/IEC 61000-4-5 | 1.2/50 µs shock waves immunity test, 1 kV common mode conforming to EN/IEC 61000-4-5 |Conducted RF disturbances conforming to EN/IEC 61000-4-6 |Conducted and radiated emissions conforming to CISPR 11 Packing Units Unit Type of Package 1 :PCE Number of Units in Package 1 :1 Package 1 Height :2.000 cm Package 1 Width :6.000 cm Package 1 Length :10.500 cm Package 1 Weight :38.000 g Unit Type of Package 2 :S02 Number of Units in Package 2 :97 Package 2 Height :15.000 cm Package 2 Width :0.000 cm Package 2 Length :40.000 cm Package 2 Weight :4.040 kg Shipping weight : 2 Kg