X20AI4632 B&R 4 analog inputs, Either current or voltage signal possible, 16-bit digital converter resolution, Simultaneous input conversion, Very fast conversion time

Estimated Lead Time : 9 – 13 Weeks

Manufacturer : B&R

Part Number : X20AI4632

I/O module : 4 analog inputs ±10 V or 0 to 20 mA

B&R ID code : 0x1BA1

Status indicators : I/O function per channel, operating state, module status

Module run/error : Yes, using LED status indicator and software

Inputs : Yes, using LED status indicator and software

Channel type : Yes, using software

Power consumption

Bus : 0.01 W

Internal I/O : 1.5 W

Additional power dissipation caused by actuators (resistive) [W] –

Certifications

CE : Yes

UKCA : Yes

ATEX : Zone 2, II 3G Ex nA nC IIA T5 Gc

IP20, Ta (see X20 user’s manual)

FTZÚ 09 ATEX 0083X

UL : cULus E115267

Industrial control equipment

HazLoc : cCSAus 244665

Process control equipment

for hazardous locations

Class I, Division 2, Groups ABCD, T5

DNV : Temperature: B(0 – 55°C)

Humidity: B(up to 100%)

Vibration: B(4 g)

EMC: B(bridge and open deck)

LR : ENV1

KR : Yes

ABS : Yes

EAC : Yes

KC : Yes

Input : ±10 V or 0 to 20 mA, via different terminal connections

Input type : Differential input

Digital converter resolution

Voltage : ±15-bit

Current : 15-bit

Conversion time : 50 μs for all inputs

Output format : INT

Output format Voltage : INT 0x8001 – 0x7FFF / 1 LSB = 0x0001 = 305.176 µV

Output format Current : INT 0x0000 – 0x7FFF / 1 LSB = 0x0001 = 610.352 nA

Input impedance in signal range

Voltaget : 20 MΩ

Currentt : –

Load

Voltaget : –

Currentt : <400 Ω Input protectiont : Protection against wiring with supply voltage Permissible input signal Voltage Max.: ±30 V Current Max.: ±50 mA Output of digital value during overload Undershoot Voltage : 0x8001 Undershoot Current : 0x0000 Overshoot Voltage : 0x7FFF Overshoot Current : 0x7FFF Electrical isolation : Channel isolated from bus Channel not isolated from channel Conversion procedure : SAR Input filter : Hardware - Third-order low-pass filter / cutoff frequency 10 kHz Max. error Voltage Gain : 0.08% Offset : 0.01% Current Gain : 0.08% Offset : 0.02% Max. gain drift Voltage : 0.01%/°C Current : 0.01%/°C Max. offset drift Voltage : 0.001%/°C Current : 0.002%/°C Common-mode rejection DC : 70 dB 50 Hz : 70 dB Common-mode range : ±12 V Crosstalk between channels : <-70 dB Nonlinearity Voltage : <0.01% Nonlinearity Current : <0.015% Insulation voltage between channel and bus : 500 Veff Mounting orientation Horizontal : Yes Mounting orientation Vertical : Yes Installation elevation above sea level 0 to 2000 m : No limitation >2000 m : Reduction of ambient temperature by 0.5°C per 100 m

Degree of protection per EN 60529 : IP20

Temperature Operation

Horizontal mounting orientation : -25 to 60°C

Vertical mounting orientation : -25 to 50°C

Derating : See section “Derating”.

Storage : -40 to 85°C

Transport : -40 to 85°C

Note : Order 1x terminal block X20TB12 separately.

Order 1x bus module X20BM11 separately.

Pitch : 12.5+0.2mm

Operation,Storange&Transport : 5 to 95%, non-condensing

Shipping Weight : 1.5 Kg