Estimated Lead Time: 6-8 Weeks
Manufacturer: Honeywell
Y8610U4001/U
Converts atmospheric standing pilot gas systems to intermittent pilot. Max capacity of 150kBtuh
Intermittent Pilot Retrofit Kits save energy by converting atmospheric standing pilot systems to intermittent pilot. Typical applications are gas-fired atmospheric furnaces,
boilers and heating appliances.
Use with natural or LP gas
Includes gas valve, ignition module, pilot burner hardware, ignition cable, and wiring harness
Provides 100 percent pilot gas shutoff if pilot fails to light; after 6-minute delay, trial for ignition is repeated.
Ignition trail/delay sequence is repeated until the appliance lights or call for heat is removed.
Dimensions (in.) : 3 15/16 in. high x 5 7/16 in. wide x 2 5/8 in. deep
Dimensions (mm) : 100 mm high x 138 mm wide x 67 mm deep
Includes : VR8204A2142 valve (1/2 x 1/2; 3.5″ WC setting; 150 kBtu/hr at 1″ p.d.)
Electrical Ratings : 24 Vac
Frequency : 60 Hz
Flame Failure Response Time (sec) : 2.0 sec
PrePurge : 0 or 30 seconds
Ambient Temperature Range (F) : -40 F to +165 F
Ambient Temperature Range (C) : -40 C to +74 C
Ignition System Type : Intermittent Pilot
Ignition Sequence : Continuous retry, after trial for ignition, pilot gas shuts off for 5 minutes, then another trial for pilot ignition takes place
Typical Gas Control : VR8204, VR8304
Type of Gas : Natural or LP
Flame Sense : Single Rod or Two Rods
Ignition Source : Internal high voltage spark generator
Ignition Trials To Lockout : continuous retry
Lockout Timing : 15 or 90 seconds
Ignition Trial Time (sec) : 15 or 90 seconds
Maximum Valve Load @ 24 Vac (Amps) : 1A Pilot, 2A Main @ 24Vac
Typical Ignition Hardware : Q345, Q3451
Shipping Weight : 2 Kg
Download PDF File Y8610U4001/U
Reviews
There are no reviews yet.